{
    "id": "sam:1dbf28e87e16456e9a6e78ff4f5b16db",
    "url": "https://outfortender.com/tender/sam-1dbf28e87e16456e9a6e78ff4f5b16db",
    "official_notice": "https://sam.gov/opp/1dbf28e87e16456e9a6e78ff4f5b16db/view",
    "title": "Splash Shield",
    "titles": {
        "en": "Splash Shield"
    },
    "description": "567 Tar Shield Salient Characteristics for Matrix: The contractor shall furnish and deliver one (1) splash shield partition room meeting the following minimum salient characteristics: Metal Frame Tubing: 5 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom. Metal Frame Tubing for Curtain Areas:16 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom.16 ft -0 inches W 2 inches x 4 inches One tube for top and one tube for bottom. No Ceiling with the partition room. Angle-iron frame, finished with gray powder coating. Two doors each to be equipped with a keyed cylinder lock on door. FOR FULL PANELS Overall partition height of 8 feet, 5 inches with minimum 4-inch open clearance on the bottom of all panels except the doors. Each Panel shall be in width of no more or no less than: 1/4-inch-thick clear polycarbonate.2 ft 0 inches Panel5 ft 0 inches Top and Bottom Tube9 ft 0 inches Panel 10 ft 0 inches Panel3 ft 7 inches Door1 ft 9 inches Panel7 ft 6 inches Panel 7 ft 0 inches Panel8 ft 0 inches Panel 10 ft 0 inches Panel 10 ft 0 inches Panel6 ft 0 inches Panel5 ft 4 inches Panel 10 ft 0 inches Panel8 ft 11 inches Panel3 ft 7 inches Door Material shall be delivered to the Government-designated location. Government-furnished / not included: Industrial sliding curtains for the two Section #6 openings. Strip door for the Section #9 opening. Purchase only, no install requested. The cited vendor quote identifies the partition as a single room with polycarbonate panels and a door, with the above framing, finish, height, and lock requirements.",
    "description_language": "en",
    "buyer": "W6QM MICC-FT DRUM, Dept of Defense",
    "country": "US",
    "country_name": "United States",
    "category": "Construction structures, materials and products",
    "procedure": "Combined Synopsis/Solicitation - Small Business Set Aside - Total",
    "published": "2026-09-28",
    "deadline": "2026-10-06T12:00:00-05:00",
    "status": "open",
    "source": "sam"
}