M456 AND M458 DETONATING CORDS

Che cosa richiede la stazione appaltante

SOURCES SOUGHT FOR M456 AND M458 DETONATING CORDS INTRODUCTION The U.S. Army Contracting Command – Rock Island (ACC-RI), on behalf of the Office of the Project Manager for Close Combat Systems (OPM-CCS) is conducting a Market Survey to identify potential sources capable of manufacturing and delivering 3000 FT – CORD, DETONATING: TYPE I, CLASS E, M456 (Department of Defense Identification Code M456, NSN 1375-00-180-9356), the CORD, DETONATING, REINFORCED, M456 (Department of Defense Identification Code M456, NSN 1375-00-028-5168), and 3000 FT – DUMMY CORD, DETONATING: INERT, M458 (Department of Defense Identification Code M458, NSN 1375-00-621-8373). Based on the responses to this Sources Sought notice/market research, this requirement may be set-aside for small businesses (in full or in part) or procured through full and open competition. Multiple awards may be made. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. PROGRAM/SYSTEM DESCRIPTION DODIC: M456 3000 FT – CORD, DETONATING: TYPE I, CLASS E P/N 13042069 / NSN: 1375-00-180-9356 Type I Class E Detonating Cord consists of a minimum core of 50 grains per foot of PETN per MIL-DTL-387 with an optional center string, protected by layers of material: an optional paper liner, braided or counter wrapped textile, and an olive drab plastic sheath. The cord has a maximum diameter of 0.235 inches. The cord has a detonating velocity of not less than 5,900 meters per second and is waterproof. DODIC: M456 CORD, DETONATING, REINFORCED P/N 2114302 / NSN: 1375-00-028-5168 Type I Class M Detonating Cord (Reinforced) consists of the same construction as Type I Class E with an additional, outer layer of wax coated textile, while having a maximum diameter of 0.225 inches.[MB1] DODIC: M458 DUMMY CORD, DETONATING: INERT P/N 13042070 / NSN: 1375-00-621-8373 Type III Inert Detonating Cord is similar to Type 1, Class E in construction and external appearance and consists of an asphalt coated cotton tube sheathed in an outer cover of smooth plastic-coated rayon. However, it is inert loaded with polyvinyl chloride (PVC) filler and the plastic outer coat is either blue or bronze. The primary use of Detonating Cord is to prime and detonate other explosive charges, although it is also used in urban breaching operations. The M458 Inert Detonating Cord is used in demonstration and training for demolitions and does not perform any ballistic function. REQUIRED CAPABILITIES: The Government requires the manufacture, inspection, testing, and delivery of the three types of Detonating Cord in accordance with the Government owned Technical Data Packages (TDPs). The respondent must have available most of the skills, facilities, and equipment to manufacture, test/inspect, and deliver the Detonating Cord. Specific manufacturing capabilities include but are not limited to explosive and pyrotechnic processing, loading and Load Assemble Pack (LAP) of the final products. First Article Testing (FAT) as well as Conformance/Lot Acceptance Testing (LAT) at the component and end-item level to include physical measurements and functional testing will be required. If a respondent does not have the adequate resources (technical, manufacturing, personnel, etc.) available, the respondent must be able to describe and demonstrate their ability to obtain these…

Lingua di questo bando: English. Titolo e descrizione sono mostrati esattamente come pubblicati dalla stazione appaltante.