Out For Tender › Verenigde Staten › Reparatie- en onderhoudsdiensten
USCGC ASPEN DryDock Repairs FY27
- Aanbestedende dienst
- CG-SEA-C22, Homeland Security, Department of
- Land
- Verenigde Staten
- Categorie
- Reparatie- en onderhoudsdiensten
- Sluitingsdatum
- Sluit over 10 dagen (9 Nov 2026 11:00 UTC-8)
- Gepubliceerd
- 21 Oct 2026
- Procedure
- Sources Sought
Lees de officiële aankondiging en schrijf in → Inschrijven gebeurt altijd op het portaal van de aanbestedende dienst, nooit hier.
Wat de aanbestedende dienst vraagt
This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. The US Coast Guard, Surface Forces Logistic Center, Alameda CA is seeking contractors interested in providing Maintenance and Repair Services with DRYDOCK AVAILABILITY FY2027 for the USCGC ASPEN (WLB-208) FY27 Drydock Availability. The US Coast Guard Cutter ASPEN (WLB-208) is a 225' seagoing buoy tender homeported at: 4688 Homer Spit Road. Home, AK 99603. Work list will include but is not limited to: Drydocking of a vessel 225ft in length, inspection/maintenance/ and preservation of underwater body paint/hull/ and buoy deck anchor chain, maintenance to rudder/propeller/thrusters/ and shafting, cleaning of ballast/sewage/fuel tanks and piping, crane/deck equipment work, and renewal of sea valves and strainers There are approximately 108 Line Items. ***PLEASE SEE ATTACHMENT*** 1. A WLB's design limits its use to protected and inland waters. The cutter is not crewed for continuous steaming and is normally limited to daylight transits. Due to crewing and cutter employment standards, seven days transit is the limit of crew endurance under normal operating conditions. Ten hours of transit per day is the planning factor due to crew fatigue. WLB's have a maximum speed of 10 knots, however, environmental factors frequently limit average speed to 6.5 knots. 2. Foreseeable costs (crew lodging, messing, rental vehicles, fuel, and authorized crew travel in accordance with the Joint Travel Regulations) will be added to the pricing and will be an economic consideration for award. CUTTERS HOMEPORT: Homer, AK PLACE OF PERFORMANCE: Contractors Facilities DESCRIPTION OF WORK: See attached (Rev-0, 01 October 2026) USCGC ASPEN (WLB 208) SPECIFICATION FOR DRYDOCK REPAIRS FY2027 ***PLEASE SEE ATTACHMENT FOR FULL DETAILS*** ANTICIPATED PERIOD OF PERFORMANCE: 07/06/2027 11/07/2027 (125 Days) The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,300 employees. SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information and a positive statement OF INTEREST, to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to POC listed in the Contract Opportunities announcement with the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern. 4. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to you company. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. If claiming HUBZone status, provide a copy of your HUBZone Certificate from SBA. If claiming SDVOSB status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the…
Taal van deze aankondiging: English. Titel en beschrijving tonen we precies zoals de aanbestedende dienst ze heeft gepubliceerd.
How this compares
- This is one of 396 open tenders in Verenigde Staten for Reparatie- en onderhoudsdiensten.
- Bidders were given 19 days from publication to the deadline; the median for open tenders in Verenigde Staten is 21 days.
More open tenders from this buyer
USCGC ALDER DD FY27
CG-SEA-C22, Homeland Security, Department of
IBCTSUP-RED GEAR OVERHAUL PARTS AND TECH SERVICES
CG-SEA-C22, Homeland Security, Department of
DRYDOCK REPAIRS FOR THE CGC PATOKA
CG-SEA-C22, Homeland Security, Department of
CGC BARBARA MABRITY
CG-SEA-C22, Homeland Security, Department of
OVERHAUL OF CATERPILLAR MARINE DIESEL ENGINE ONBOARD USCG CUTTERS
CG-SEA-C22, Homeland Security, Department of
Similar open tenders
Full & Open Brand Name OEM "Curtiss-Wright Electro-Mechanical Corp" - Low Pressure Air Compressor (LPAC) Maintenance Services
NAVSUP FLT LOG CTR PUGET SOUND, Dept of Defense
C-5 Battery Control Electronics Module (BCEM)
FA8538 AFSC PZAAB, Dept of Defense
Preventative Maintenance and Repair of Heavy Equipment for the Fort Mifflin Project Office
W2SD ENDIST PHILADELPHIA, Dept of Defense
Preventative Maintenance and Repair of Heavy Equipment for the Fort Mifflin Project Office
W2SD ENDIST PHILADELPHIA, Dept of Defense
J061--541 Electrical Power Distribution Equipment Testing, Inspection, and Maintenance - VAMC Cleveland
250-NETWORK CONTRACT OFFICE 10 (36C250), Veterans Affairs, Department of
Source: SAM · reference ASPENSSNDDFY27 · JSON