DRYDOCK: USCGC DILIGENCE DDL FY27

O que a entidade adjudicante procura

SOURCES SOUGHT NOTICE USCGC DILIGENCE (WMEC 616) DRYDOCK REPAIRS FY27 70ZU0127DILIGENCEDDL This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, CG-SEA-C21 Norfolk, VA to identify sources capable of providing the following: DRYDOCK REPAIRS SPECIFICATION: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform Drydock Repairs to the U.S. Coast Guard Cutter (USCGC) DILIGENCE (WMEC 616), a 210-foot A-Class, Medium Endurance Cutter. The vessel is home ported in Pensacola, FL. All work will be performed at the contractor’s facility. There is no geographical restriction for this cutter. SCOPE OF WORK: The scope of the acquisition is for the Drydock Repairs of the USCGC DILIGENCE (WMEC 616). This work will include, but is not limited to the following Work Items: WORK ITEM 1: Hull Plating, U/W Body, Ultrasonic Testing WORK ITEM 2: U/W Body, Preserve, 100 percent WORK ITEM 3: Appendages (U/W), Preserve (Internal) and Leak Test WORK ITEM 4: Propulsion Shaft Fairwaters And Rope Guards, Inspect WORK ITEM 5: Voids (Non-Accessible), Preserve (Internal) and Leak Test WORK ITEM 6: Propulsion Shafting, Strain Gauge Alignment, Drydock, Check WORK ITEM 7: Propulsion Shafting; Remove, Inspect, and Reinstall WORK ITEM 8: Propulsion Intermediate Shafts; Remove, Inspect, and Reinstall WORK ITEM 9: Propulsion Shaft Coating, Renew WORK ITEM 10: Propulsion Shafting, Straighten (Optional) WORK ITEM 11: Propeller Shaft Sleeves, Renew WORK ITEM 12: Propulsion Shafting, Optical or Laser Alignment Check (Optional) WORK ITEM 13: Propulsion Shaft Seal (Mechanical And Inflatable) Assemblies, Inspect And Repair Or Renew WORK ITEM 14: Propulsion Shaft Bearings, External, Renew WORK ITEM 15: Stern Tube Interior Surfaces, Preserve, 100 Percent WORK ITEM 16: Controllable Pitch Propellers, Clean and Inspect WORK ITEM 17: Controllable Pitch Propeller (CPP) System, Inspect and Service WORK ITEM 18: Controllable Pitch Propeller (CPP) Hubs, Renew (Optional) WORK ITEM 19: Controllable Pitch Propeller (CPP) Hubs, Inspect (Optional) WORK ITEM 20: Fathometer Transducer, Renew WORK ITEM 21: Fathometer Transducer, General Maintenance (Optional) WORK ITEM 22: Doppler Speed Log Transducer, Clean and Inspect WORK ITEM 23: Sea Valves and Waster Pieces, Overhaul Or Renew WORK ITEM 24: Sea Strainers, Duplex, All Sizes, Overhaul WORK ITEM 25: Rudder Assembly, Remove, Inspect And Reinstall WORK ITEM 26: Tanks, MP Fuel Storage and Overflow, Preserve 100 Percent WORK ITEM 27: Cathodic Protection, Zinc Anodes, Renew WORK ITEM 28: Drydock WORK ITEM 29: Temporary Services, Provide - Cutter WORK ITEM 30: Reverse Osmosis Foundation, Renew WORK ITEM 31: MSD Space, Deck and Bilge, Preservation WORK ITEM 32: Pilot House Coaming, Renew WORK ITEM 33: Structural Plating, 03 Deck & Foundations, Renew WORK ITEM 34: Centerline Vertical Keel, Renew WORK ITEM 35: Potable Water Tank Plate, Renew WORK ITEM 36: Tanks, Dirty Oil and Waste, Preserve, 100 Percent & Partial Renew WORK ITEM 37: Scullery Deck Plating, Renew WORK ITEM 38: Fuel Manifold, Overhaul WORK ITEM 39: Hull and Structural Plating, Steel Plate, Renew (Optional) ANTICIPATED PERIOD OF PERFORMANCE: The period of…

Idioma deste anúncio: English. O título e a descrição são apresentados tal como a entidade adjudicante os publicou.

How this compares

• This is one of 438 open tenders in Estados Unidos for Serviços de reparação e manutenção.
• Bidders were given 15 days from publication to the deadline; the median for open tenders in Estados Unidos is 22 days.

More open tenders from this buyer

Similar open tenders